Marine Wet Exhaust Riser / Mixing Elbow With Raw Water Injection Ring - Stainless - Used

Marine wet exhaust riser / mixing elbow with an internal raw-water injection ring, fabricated stainless construction with a flanged dry exhaust connection and a separate raw-water inlet leg.

Application: Not verified. No manufacturer name, data plate, or OEM part number is present on this unit — the only markings are shop inventory tags. It is offered by photographs, identifiers, and dimensions only, and must be matched by measurement (flange bolt circle and bolt count, exhaust bore, raw-water inlet size, riser angle and rise height) to your engine.

Condition: Used, untested take-off. Complete in appearance with the water injection ring intact and visibly open, but showing exterior heat staining, surface rust, flaking paint, and green/verdigris corrosion at the raw-water inlet stub. Internal soot and light scale present. No pressure test, leak test, flow test, or crack inspection has been performed. Wet exhaust risers can fail internally where they cannot be seen, so a pressure test and borescope inspection before installation are strongly recommended.

Drained and ports capped before shipping. Additional photos and exact measurements available on request.

Buyer must confirm fitment by part number, photos, dimensions, engine model, serial number, and application before purchase. Used marine part sold as-is unless otherwise stated. No returns on electrical, used, special-order, or installed parts.