Marine Exhaust Elbow / Riser 4-Bolt Oval Flange With Side Nipple - Used

Used marine/industrial diesel exhaust elbow with a four-bolt rectangular flange over an oval port, an approximately 90-degree bend to a plain hose stub, and a small side nipple on a welded boss — consistent with a water-injected wet exhaust mixing elbow or exhaust riser. No manufacturer name, data plate, or part number is present on the part, so the application is not verified and is sold by photographs and dimensions only.

Condition: used, untested take-off, grade C. Complete in appearance with paint flaking, surface rust, and scaling typical of service. The bore, water passage, and injection/drain port have not been inspected, descaled, or pressure tested. Approx. 12 x 7 x 7 in packed, approx. 14 lb boxed (estimated). Will ship drained with ports capped and the flange face protected.

Buyer must confirm fitment by part number, photos, dimensions, engine model, serial number, and application before purchase. Used marine part sold as-is unless otherwise stated. No returns on electrical, used, special-order, or installed parts.