Fabricated Sheet Metal Fluid Reservoir Tank With Filler Cap And Hose Barb - Used

Fabricated sheet-metal fluid reservoir / small tank with screw-on filler cap on a raised stand-off bracket, one large approx. 3/4 in. hose barb at the low end, two to three small brazed tube stubs, and four rubber-isolated mounting studs with a grommeted pass-through.

Application: NOT VERIFIED. This item carries no manufacturer name, data plate, or part number. It is sold by photographs, physical configuration, and approximate dimensions only. It may be a coolant expansion/header tank, an auxiliary fuel or day tank, or a small hydraulic reservoir — that determination requires physical inspection.

Approximate size: 24 in. long x 7 in. wide x 5 in. deep body; about 28 in. overall including the filler bracket.

Condition: Used, untested take-off. Paint flaking and surface corrosion at the filler bracket, mounting studs, and side fittings; one small side tube appears broken. Not pressure tested, leak tested, flushed, or internally inspected — no claim is made that it holds fluid. Ships drained with ports capped.

Buyer must confirm fitment by part number, photos, dimensions, engine model, serial number, and application before purchase. Used marine part sold as-is unless otherwise stated. No returns on electrical, used, special-order, or installed parts.