Engine Oil Fill / Filler Tube Bent Steel Pipe With Flange - Used (Unverified Application)

Engine Oil Fill / Filler Tube — Bent Steel Pipe with Bolt-On Flange (Used)

Application: Application not verified. This is a bare, unmarked bent steel fill/vent tube with an oval bolt-on mounting flange at one end and a flared open mouth at the other, most consistent with a marine diesel engine oil fill neck. No manufacturer name, tag, or part number is present on the part, so it is offered by photographs, physical configuration, and dimensions only. It is the buyer's responsibility to match the flange bolt pattern, port shape, tube length, and bend geometry to their engine.

Condition: Used, untested take-off. Chalked and chipped paint, surface rust and oil staining at both flanges, old gasket residue on the mounting face, and light pitting along the tube. No cracks or through-holes observed, but the tube has not been leak- or pressure-tested. No cap, gasket, or hardware included. Ports will be capped and the tube cleaned before shipping.

Approximate size: roughly 17–19 in overall length, approx. 2 in tube OD, approx. 5 in x 2.5 in oval flange.

Quote is subject to final fitment confirmation by engine/transmission serial number, part number, photos, and supplier availability.

Buyer must confirm fitment by part number, photos, dimensions, engine model, serial number, and application before purchase.

Used marine part sold as-is unless otherwise stated. No returns on electrical, used, special-order, or installed parts.